Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Pembroke Pines?
Spring replacement in Pembroke Pines typically runs $180 – $340 for one torsion spring, and that covers the spring, the labor, and balancing the door afterward. A matched pair gets replaced together about as often as not, so a two-spring door usually lands near $360 – $680. These are typical estimated ranges for this market; the written estimate we give you sets the final price.
If your door is stuck open or closed right now, call (844) 793-5158. We offer free estimates, upfront pricing, and same-day service for urgent spring failures.
Key Takeaways
- One torsion spring: $180 – $340. A matched pair: roughly double that.
- Extension springs cost less than torsion springs; high-cycle springs cost more.
- We work on eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Our technicians have up to 15 years of experience, and spring work is one of the most dangerous jobs in this trade.
- Free estimates and same-day service are available. Estimates are free, so there’s no reason to guess at the price.
Spring Replacement Cost Breakdown (2026)
Here’s how the line items break down for a typical spring job in Pembroke Pines. Every number below is an estimated range, not a quote.
| Line Item | Typical Estimated Range |
|---|---|
| Torsion spring replacement (one spring, parts and labor) | $180 – $340 |
| Matched pair of torsion springs | $360 – $680 |
| Extension spring replacement (per spring) | $180 – $340 |
| High-cycle spring upgrade (per spring) | Above the standard range, quoted on site |
| Cable repair when a snapped spring has also frayed cable | $130 – $250 |
| Roller replacement on a door that’s been run on a broken spring | $110 – $220 |
| Track realignment after the door jumped | $120 – $240 |
| Opener repair if the spring failure burned out the motor | $120 – $320 |
| Full garage door repair encompassing several of the above | $150 – $600 |
What pushes a bill toward the top of a range? A door that’s been forced up and down on a dead spring usually needs more than springs. It needs rollers, sometimes cable, sometimes a track reset. Two-story homes and heavier insulated doors also need stronger springs, which cost more than the standard weight rating. And if the opener ran overtime against a broken spring and cooked its gear or capacitor, that’s a separate repair on top.
What Affects Spring Replacement Pricing in Pembroke Pines
- Spring type. Torsion springs mounted on a bar above the door cost more than extension springs that run along the sides. Most newer Pembroke Pines homes have torsion setups, and torsion work takes more skill and more control.
- One spring or two. A matched pair is replaced together for balance. If one spring snapped and its partner is the same age and cycle count, replacing just one leaves you back on the phone a few months later.
- Door weight. A single-car door needs a lighter spring than a double-car insulated door. Heavier doors, and doors with glass panels, carry a higher spring rating and a higher part cost.
- Condition of the surrounding hardware. A spring doesn’t fail in isolation. If the door has been slamming down for weeks, drums, cables, and rollers wear too. We check all of it and quote only what actually needs replacing.
- Access and ceiling height. Low-clearance garages and tight side clearance take longer to work in, which is a labor factor. Most Pembroke Pines garages are straightforward, but a few need a different approach.
- Brand and opener integration. If your door runs on a LiftMaster or Chamberlain opener with safety sensors tied to the travel limits, the door has to be re-traveled and re-tested after the springs go in. That’s part of doing the job right, not an upsell.
Living in South Florida shapes the calendar more than the parts list. Between the heat and the afternoon storms, garage doors here get used in short, hard bursts: in and out of the car to dodge the rain, the door cycling closed fast against a gust, then sitting in humidity that slowly works on the springs and hardware. That pattern of heavy daily use in a warm, humid climate is why spring fatigue shows up here at a steady pace rather than all at once in one season.
How to Save on Spring Replacement
There isn’t a discount to chase here, but there are ways to keep the bill from growing.
- Stop using the door the moment a spring snaps. Forcing it up with a broken spring puts the whole load on the opener and the cables. That’s how a $180 – $340 spring job turns into a repair that includes cables, rollers, and an opener.
- Get the pair priced, not just the broken one. Ask for the two-spring price up front so you can compare the real cost of doing it once versus twice. Free estimates make this easy: call (844) 793-5158 and we’ll walk you through both numbers.
- Fix the small stuff at the same visit. If a roller is cracked or a track is bent while we’re already there, the add-on cost is smaller than a second service call for the same problem later.
- Ask about high-cycle springs if your door gets heavy daily use. A household that cycles the door a dozen or more times a day will get more life out of a higher-cycle spring. It costs more up front, but it’s a straight comparison you can make on the estimate.
- Don’t let a slow, noisy door sit. A door that’s gotten louder or slower is telling you something. Diagnosing it early is cheaper than waiting for the snap.
One more: don’t compare our estimate to a DIY spring kit price. The spring is the cheapest part of the job. The rest is knowing the right wire gauge and length for your door’s weight, setting the winding bars, and not losing fingers. We’ll explain why that matters in the next section.
Why Spring Work Is a Job for a Trained Technician
A torsion spring holds hundreds of pounds of tension, and it holds it whether or not the door is moving. Winding or unwinding one with the wrong bars, or with the door in the wrong position, releases that stored energy in an instant. That’s why spring repair is one of the few garage door jobs we flatly tell homeowners not to attempt themselves, and why we treat it as a safety call rather than a quick fix.
Our technicians have up to 15 years of experience and are trained specifically on this job. They know the eight major systems in homes around here, so they arrive already familiar with the door in front of them instead of figuring it out on the spot. That matters because the spring you need depends on the door’s weight, drum size, and track, not just the brand name on the opener.
We also don’t sell a new door because springs are the only line we can’t make money on. If springs alone solve it, that’s what we quote. Brand-independent recommendations keep the diagnosis honest. For a closer look at how we handle a failed spring specifically, see our page on spring replacement.
Which Doors and Brands We Service
Springs fail on every brand and every age of door, and we cover the brands most Pembroke Pines homes actually have: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand coverage means a Clopay door with a Raynor-style torsion setup, or a Wayne Dalton door paired with a Chamberlain opener, gets handled by someone who already knows the hardware.
The same call covers repair, opener repair, spring repair, and full installation, so you’re not passed to a different contractor halfway through. If it turns out the door is beyond a spring job, we’ll tell you that on the estimate, not after the work starts.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Pembroke Pines?
Expect $180 – $340 for one torsion spring, or roughly twice that for a matched pair. Extension springs, cable repair, and any collateral damage from forcing the door run extra. Call (844) 793-5158 for an exact quote, and remember estimates are free.
Should I replace one spring or both?
Replace both if they’re the same age. A matched pair shares the same cycle count, so the second spring is usually close behind the first. Doing the pair once, at roughly $360 – $680 total, costs less than two separate visits. Call (844) 793-5158 and we’ll price both options for you.
Can you fix a broken spring the same day?
Same-day service is available for urgent spring failures, and emergency service is available outside standard business hours for a door that’s stuck open or closed. Spring jobs are usually completed in a single visit once the right springs are matched to your door. Call (844) 793-5158 to check availability.
Is it cheaper to repair the springs or replace the door?
Repair is almost always cheaper. A spring replacement at $180 – $340 for one spring, or roughly double for a pair, is far less than a new door installation, which runs $700 – $2,200. A new door only makes sense when the door itself is failing, not the spring. Get a free estimate and we’ll tell you which one you need: call (844) 793-5158.
Why did my spring break in the first place?
Springs break from cycle count, not age alone. Every open and close uses up a bit of the spring’s rated life, and a door used heavily in a warm, humid climate works those cycles in fast before the spring finally gives. If your door gets a lot of daily use, a higher-cycle spring is worth pricing on the estimate. Call (844) 793-5158 for a free look.
Related Services and Nearby Areas
Springs are the most common failure, but they’re rarely the only thing that needs attention on a door that’s been used hard. When we’re already at your door, we can quote any of these on the same visit:
- garage door repair for the general fix that ties it all together
- garage door opener repair when the motor’s taken the brunt of a broken spring
- garage door installation if the door itself is past saving
- cable repair for frayed or snapped cables alongside a spring failure
- Also serving nearby communities like Miromar, Cooper City, Davie, and Hollywood
For the full range of what we handle, start at Pembroke Pines Garage Door Repair Pros. If you’re searching for a garage door spring repair specialist, that’s what we do, every day.
Get a Free Spring Replacement Estimate
Call (844) 793-5158 for a free estimate on spring replacement in Pembroke Pines. We’ll match the right springs to your door, explain what the door needs and what it doesn’t, and give you a written estimate with the final price on it. Upfront pricing, same-day service, trained technicians, and a satisfaction guarantee. A broken spring leaves the door heavy and the house less secure, so the sooner it’s fixed, the better, and there’s no charge to find out what it costs.
Pricing reflects the Pembroke Pines market as of 2026. Pembroke Pines Garage Door Repair Pros offers free estimates – call (844) 793-5158.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Cole Bennett"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Nisha Sharma"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Danielle Hayes